Seguin Epoxy Floors & Concrete PolishingSeguin Epoxy Floors & Concrete Polishing(830) 340-0036

Commercial & Industrial Epoxy Floor Coatings in Seguin TX - a working floor that holds up

Worn, stained or slick concrete in your shop or warehouse? We test the slab, coat it and get your floor back in use.

Smooth gray epoxy floor with a long drain in a spacious workshop with wood-paneled walls.

What does it take to coat a working commercial floor in Seguin?

Commercial and industrial epoxy floor coating in Seguin, TX is a coating system put down over a prepared concrete slab. It gives a shop, warehouse or kitchen a hard floor that cleans up easily, and it reopens in stages as it cures, first to foot traffic, then light vehicles, then heavy traffic.

Most business owners and property managers who call Seguin Epoxy Floors & Concrete Polishing have a floor that's dusting, stained or slick, and they can't close the place for long. The price moves with the size of the floor, how much repair and prep the slab needs, what the moisture readings show and whether you need a gritty finish. The schedule turns on how long you can shut the space, because a new floor opens to people first and to heavy traffic last.

I walk the floor and check the slab before I give you a written estimate, so the figure comes from your concrete and not a guess. I also sort out the permit question with the city before we start.

  • Moisture and crack checks before we plan anything, because an unchecked slab is how coatings end up lifting.
  • Opening up the slab's surface so the coating bonds to sound concrete, not dust or old sealer.
  • A closure plan that reopens the floor to people first, then carts, then forklifts.

What happens after you call about a commercial floor in Seguin?

Here's how a commercial job runs with us, from the first call to the walk-through on the finished floor. I'm on site for the estimate and running the job, and our own crew does the work.

  1. Call, email or send the form

    Call (830) 340-0036, email hi@seguinepoxyflooringandconcretepolishing.com or use the form, and we'll get back to you to set up a visit. Have the floor's size, what it's used for, the traffic it carries and the dates you can close it ready, because the closure drives the whole plan.

  2. I walk and test the floor

    I come out myself, look at the floor, check the slab for moisture and cracks and ask how your people use the space. You get a written estimate that lays out the prep, the coating and the closure we'd plan around.

  3. Our crew preps and coats

    If you go ahead, we set a date that fits your closure, and our own crew does the prep and the install with me running the job. One maker warns that breathing the vapor from its epoxy can cause headache, nausea and irritation of the nose, throat and lungs, so plan where your staff will work while the coating goes down.

  4. We walk the finished floor

    Before we pack up, we walk the finished floor with you and go over when it can take people, carts and heavier traffic. The coating keeps curing after we leave, so those reopening dates matter as much as the install.

How we do commercial and industrial epoxy floor coatings

On a working floor the hard part is the schedule, so we start by planning the closure with you around when the floor can take people and when it can take carts and forklifts. Then I take slab readings, and our crew opens up the top of the concrete so the coating can grip, repairs cracks, puts the coating down and leaves it alone until it's ready for your traffic. The prep is the part you won't see once the floor is down, and it's the part that decides whether the coating holds. Satisfaction guaranteed on every job.

Some business owners also have a garage or a small bay at home, and our garage floor coatings follow the same test-first approach. If you want to look at more than one system, we also install polyaspartic floor coatings, and I'll tell you on site which one your slab and your closure can handle.

  • Smooth finish for dry work areas

    This suits storage rooms, showrooms and dry shop floors where carts roll and not much gets spilled. A smooth surface is the easiest to sweep and mop, so daily cleanup stays quick.

  • Gritty finish for wet or oily floors

    One coating maker recommends a gritty, slip-resistant material mixed into the finish for any floor that may get wet, oily or greasy, so on floors like that I'll talk with you about adding it so your crew keeps its footing. If you're collecting bids, ask each one whether that textured finish is in the quote.

Get a written estimate for your commercial epoxy floor

Send the form and we'll reply within one business day to set up a free on-site visit, with no pressure to book. I'll walk the floor, check the slab and give you a written estimate.

(830) 340-0036

Questions about commercial epoxy floors in Seguin

These are the questions business owners and property managers in Seguin ask most before they close a floor for coating. If yours isn't here, call and I'll answer it straight.

Does my concrete need to be tested before an epoxy coating goes on?

Yes, the slab should be tested for moisture coming up through the concrete before any coating goes on. The coating makers say testing belongs at the start of the project, because missing their guidelines can lead to peeling, discoloration, blistering or a coating that fails outright, which is why I take slab readings at the estimate.

How long does a commercial epoxy floor take to cure before we can use it?

For one maker's floor epoxy, light foot traffic may return in 24 hours, light vehicles in 72 hours and heavy traffic in 7 days, and those times assume 70 degrees and 50% humidity. Cooler weather slows the cure, so ask how the season moves your reopening dates, and plan a closure long enough for heavy traffic to wait the full time.

How much does a commercial epoxy floor coating cost in Seguin?

I can't give you a fair price until I've seen the floor, because on commercial jobs the prep varies more than anything else. Oil soaked into the slab, old coatings that have to come off, cracks and the moisture readings all change the work, and your written estimate spells out what your floor needs.

What is the best way to prepare concrete for an epoxy floor coating?

The coating makers name shotblasting or diamond grinding as the preferred prep, because both open up the top of the concrete so the coating has something to bite into. If you're comparing bids, ask each crew which method they plan to use, and I'll tell you which one we're using on your floor and why before we start.

Does a flooring contractor have to be registered with the City of Seguin?

Yes, the City of Seguin requires all contractors to be registered with its Development Services Center before any permit is issued. We're fully licensed and insured, and if your job needs a permit, we apply for it as the contractor and you get a copy.

What kind of floor does a food business in Seguin need?

Seguin's food establishment construction guide says floors in food prep, storage, dishwashing, walk-in refrigerator and restroom areas must be smooth, durable and impervious to water, and its examples of easily cleanable floors include sealed concrete, tile, terrazzo and linoleum. The guide also wants the joint where floor meets wall coved, curving up the wall, and closed, and where you clean by flushing with water, the floor has to be graded to drain with those joints coved and sealed. Plans and specs go to the Health Department for review before you remodel or change your food operation, so bring us in early enough to fit the floor into that plan.

Commercial & industrial epoxy floor coatings in Seguin and nearby

Seguin's Building Official decides on permits, and its no-permit list names painting, not floor coating, so I check with the building office and we apply as the contractor if one's needed. We also work in these cities and beyond.

(830) 340-0036Get an estimate