Seguin Epoxy Floors & Concrete PolishingSeguin Epoxy Floors & Concrete Polishing(830) 340-0036
Seguin Epoxy Floors & Concrete Polishing
(830) 340-0036Get an estimate

Flooring Contractor in Luling, TX - Garage and Shop Floors That Hold Up

Seguin Epoxy Floors & Concrete Polishing is a flooring contractor based in Seguin that coats, polishes and repairs concrete floors in Luling, TX, from home garages and patios to shop and small business floors.

Get an estimate(830) 340-0036
A spacious garage with a glossy, speckled gray-and-tan coated floor, wall-mounted tools, bicycles, and storage shelves.

The garage, shop and house floors we see in Luling

Luling sits a short drive east of us in Seguin, and the floors we're called about there are mostly concrete that's already put in years of work. That means home garages that have held trucks and oil changes, shop floors behind small businesses, and houses on a slab where somebody wants the carpet gone and the concrete underneath made into the floor. We do the same work over in Lockhart and New Braunfels.

A lot of those slabs have been patched, painted or sealed somewhere along the way, and that's what shapes the job. The old layers have to come off and the cracks have to be dealt with before anything new goes down, or the new floor won't stay put.

Floor coatings and concrete work we do in Luling

Everything we offer is available in Luling, from garage coatings and polished slabs to shop floors and pool decks. We plan each job prep first, because on older concrete the stripping, grinding and repair work decides whether the finish holds. Then we match the system to how you use the floor, whether that's parking, foot traffic, forklifts or wet feet by the pool. Our own crew does the work, and I run every job myself.

  • Epoxy Floor Coatings

    Older garage and utility slabs here often show oil stains, wear and old patches. We grind the surface open, repair what needs it and lay down an epoxy coating that bonds to clean concrete.

    Explore service

  • Commercial & Industrial Epoxy Floor Coatings

    Shops and small businesses around Luling need a working floor back in use that takes forklifts, carts and spills. We plan the prep and the coating around your hours and your traffic.

    Explore service

  • Garage Floor Coatings

    Garages here usually carry years of tire marks, oil and peeling paint from earlier fixes. We strip and grind that off, fix cracks and put down a flake or solid-color system built for cars.

    Explore service

  • Polyaspartic Floor Coatings

    When you can't give up the garage for long, a faster-curing coat makes sense. Polyaspartic goes down over the same careful prep and lets you back on the floor sooner than epoxy.

    Explore service

  • Metallic Epoxy Flooring

    Some Luling homeowners want the slab under old carpet or tile to be the finished floor. Metallic epoxy gives that slab a deep, poured look, once we've ground it flat and clean.

    Explore service

  • Urethane Cement Flooring

    Food prep areas, wash bays and shops with hot water or harsh cleaners wear out ordinary coatings. Urethane cement is a thicker system we use where heat, water and chemicals hit the floor daily.

    Explore service

  • Polished Concrete Flooring

    Houses and storefronts on a slab often have sound concrete hiding under flooring someone wants gone. We grind and polish that concrete into a hard, low-upkeep floor with no coating to peel.

    Explore service

  • Stained Concrete Flooring

    Patios, porches and interior slabs that look tired but are still sound don't always need a full coating. We clean, stain and seal the concrete so it gets color without the build-up.

    Explore service

  • Terrazzo Flooring

    Lobbies, entries and older commercial spaces sometimes call for a floor meant to last for decades. We'll tell you plainly whether your slab and budget suit terrazzo before you commit to it.

    Explore service

  • Basement Flooring

    Basements are rare around here, but below-grade rooms and cellars do turn up, and they bring moisture through the slab. We test for that first and pick a system that can handle it.

    Explore service

  • Concrete Grinding & Surface Preparation

    Most floors we see here have something on them already, whether that's paint, sealer or an old coating. We grind down to clean, open concrete because nothing we put down sticks without it.

    Explore service

  • Concrete Sealing

    Driveways, walkways and garage slabs that are in decent shape mostly need protection from stains and wear. We clean the concrete and apply a sealer that suits how the surface gets used.

    Explore service

  • Concrete Resurfacing & Overlays

    Older slabs with a flaking, chipped top layer or years of patches can often be saved instead of torn out. We repair the worst spots and put a fresh overlay across the whole surface.

    Explore service

  • Self-Leveling Concrete & Overlays

    Floors that dip, slope or have uneven old patches show every flaw once a coating goes on. A self-leveling overlay gives us a flat base for the finish or for new flooring on top.

    Explore service

  • Pool Deck Coatings & Resurfacing

    Pool decks take water, chemicals and bare feet, and older ones crack, stain or get slick. We repair and resurface the deck with a coating picked for grip and comfort underfoot.

    Explore service

  • Concrete Floor Stripping & Removal

    Failed epoxy, old paint and glue from tile or carpet are common on floors here, and they have to go before anything new. We strip it all off down to clean concrete.

    Explore service

What these floors look like when the prep is done right

These photos show the kinds of floors we put down, from flake garage coatings to polished slabs and shop floors. They show finish types, not one particular job, so ask me what fits your Luling floor when I come out.

  • A commercial room with a smooth gray epoxy floor, yellow safety border, black drainage grates, and metal equipment supports.

  • A large insulated workshop with a glossy gray concrete floor divided by expansion joints.

  • A workshop with a gray-and-white speckled epoxy floor and several red vehicle lifts between unfinished walls and shelving.

Working in Luling: permits, prices and what to expect

Two things shape a Luling floor job before any work starts: what the city wants and what your slab needs. Here's how we handle both, and what moves the price and the schedule.

Checking with the city before we start

Permits in Luling come from the city's Building Inspection office. Its list names work like structural, electrical, plumbing, roofing and fencing. Floor coatings aren't named, and that doesn't mean your job is in the clear, so I don't guess. The city asks owners to check with it before starting when a project's permit needs aren't clear, and that's what I do before we set a date.

If the city says a permit is needed, we apply for it as the contractor and you get a copy. The city sends plan reviews and inspections to an engineering firm it works with, so a permitted job takes more lead time, and we plan the start around that. When you're comparing contractors, ask each one who handles the city and whether they're insured.

  • Ask any floor contractor whether they've checked with the city about your job.
  • We're fully licensed and insured, and our own crew does the work.
  • The city's permit form expects a clean job site, and we work that way.

What moves the price and the schedule

Price comes down to the slab as much as the finish. Square footage matters, but so does what's on the floor, because old paint, sealer, glue or a failed coating has to come off first, and every crack and low spot needs repair before a coating goes over it. The system you pick matters too, since a flake garage floor, a metallic finish and a polished slab take different work.

The schedule turns on prep and cure. Grinding and repairs take longer on a rough slab, a coating needs time to cure before you walk or drive on it, and moisture coming up through the concrete can change which system we use. If the city wants a permit, that comes first. To get your own figure, I walk the floor, check the slab and give you a written estimate.

  • Slab moisture readings come before we settle on any system.
  • A shop that has to stay open changes how we sequence the work.
  • Clearing the garage before we arrive keeps the start on track.

Get a free on-site floor estimate in Luling

Send the form or call (830) 340-0036, and we'll reply within one business day to set a time. I come out to your Luling garage, shop or house myself, walk the floor, take slab readings and give you a written estimate. It's free, and there's no obligation to book.

(830) 340-0036

What Luling garages, shops and slabs usually need from us

Most floors we're asked to fix in Luling aren't new concrete. They've been parked on, painted, patched or covered, and each of those leaves something we have to deal with before the new floor goes down.

  • Oil soaked into garage slabs

    Years of parked trucks and oil changes leave stains that soak into the concrete, not just sit on top. If that oil isn't ground out or cleaned deep enough, a coating has nothing clean to grab, so we treat stained areas before anything goes down.

  • Old paint and sealer layers

    A lot of garage and porch floors here were painted or sealed at some point, often more than once. Those layers are usually the first thing to let go, which is why we strip and grind to bare concrete rather than coat over them.

  • Cracks and patched spots

    Older slabs collect cracks and patches, and a coating shows every one of them once it's down. We open up cracks, fill them and grind patches flush, and we'll tell you if a crack looks like it's still moving and needs more than a fill.

  • Slabs under carpet and tile

    When carpet or tile comes up in a house on a slab, the concrete underneath usually has glue, tack strip holes and uneven spots. That's workable, but it takes stripping and leveling before it's ready for polish, stain or a coating.

  • Shop floors that can't sit idle

    Small business and shop owners usually need the floor back in use as soon as it can take traffic. We plan prep and coating around your hours, and we'll tell you up front if a faster-curing system makes more sense for your floor.

How we decide what your floor actually needs

I started this business in Seguin in 2021 after watching too many coatings fail on slabs nobody checked first. Here's how that shapes the way we bid and do the work in Luling.

We check the slab before we quote

I started out on the sales side of flooring, and I saw a lot of floors fail because nobody looked at the slab first. So when I come out to your place in Luling, I take the slab readings myself before we talk finishes. Moisture, old coatings, cracks and soft spots decide what will hold, and I'd rather know that before you pay for anything.

Sometimes that means telling you your slab isn't ready. If moisture is coming up or an old coating is half off, I'll say so and tell you what it takes to fix, even if that means you don't book us. I'd rather lose the job than watch a coating lift later. Most of what makes a floor last is prep you won't see once it's done.

  • Our own crew, me on site

    We don't hand your floor to a subcontractor. Our own crew does the prep and the install, and I run the job myself, so the person who read your slab is the same one making sure the prep matches what it needs.

  • Fully licensed and insured, every job

    We're fully licensed and insured, and that goes for garages, houses and shop floors alike. It's worth asking any contractor you're comparing for the same, because a floor job brings grinders, dust and strong chemicals onto your property.

  • Straight talk on which system

    If a simpler system will do the job on your floor, we'll say so, and if your slab needs repair before any coating, we'll say that too. We're best known for garage and shop floors, and for telling people plainly what their slab can handle.

  • Satisfaction guaranteed on every job

    That promise rests on the prep, because that's the part we control and the part most failed floors come back to. We don't trim it to win a bid. When you're ready, call (830) 340-0036 or use the form on this page.

Luling floor questions we hear before a job

These are the questions Luling homeowners and shop owners ask when they're planning a new floor. If yours isn't here, call (830) 340-0036 and I'll give you a straight answer.

How much does an epoxy garage floor cost in Luling, TX?

Your cost comes from three things, the size of the floor, how much prep the slab needs and which system you pick, and you'll see all of it in your written estimate. Prep is usually the swing factor on older Luling garages, since stripping old paint and grinding out oil takes real time. A polished slab with no coating can also come in differently than a flake or metallic system on the same floor.

How do I schedule a building inspection in Luling, TX?

You schedule it with the city's Permit Clerk, who handles inspection scheduling and cancellations. Inspections run Monday through Friday, holidays excluded, and have to be booked by 4:00 p.m. the business day before. On a job where we've applied for the permit, I'll keep you posted on where it stands.

How long is a Luling building permit good for?

Under the city's permit form, a permit becomes void if work is suspended or abandoned for six months after it starts, or if no inspection has been done in the past six months. That matters most when your floor is one piece of a bigger remodel that could stall. If that's your situation, tell me when I come out so we can plan the floor around the rest of the project.

What causes epoxy to peel off a garage floor in Luling?

Epoxy usually peels because the slab wasn't prepped right, with paint, sealer or oil left under it, or because moisture coming up through the concrete pushed it loose. Rolling a coating over a lightly cleaned slab doesn't give it anything to grab. We strip old coatings, grind to bare concrete and check moisture before a new floor goes down.

Service areas

Besides Luling, we have pages for Seguin, Lockhart, San Marcos, New Braunfels and the other cities below, and we work in cities beyond them too. If you don't see yours, call (830) 340-0036 and ask.

Ask about your location
(830) 340-0036Get an estimate