Seguin Epoxy Floors & Concrete PolishingSeguin Epoxy Floors & Concrete Polishing(830) 340-0036
Seguin Epoxy Floors & Concrete Polishing
(830) 340-0036Get an estimate

Flooring Contractor in Seguin, TX - Garage and Shop Floors Built to Hold Up

Seguin Epoxy Floors & Concrete Polishing is a flooring contractor based in Seguin, TX. We coat, polish, grind and repair concrete floors in garages, shops, basements and businesses across the city, starting with the slab underneath.

Get an estimate(830) 340-0036
A broad gray speckled floor coating fills a commercial interior beneath bright strip lights and high windows.

What Seguin's garages, shops and homes ask of a floor

Seguin is the county seat of Guadalupe County, and the floors we're called to here run from house garages to shops and small businesses that need a working floor back in use. A lot of the calls are about garages, some bare and dusty, some with an old coating on them. We do the same work in Cibolo and New Braunfels.

The houses here aren't all from one era, so the slabs under them aren't either. One garage has been patched and painted over the years, the next is bare concrete from when the house was built, and that difference decides the prep before anyone talks about color.

Floor coating and concrete work we do in Seguin

We offer all sixteen of our services in Seguin, from garage and shop coatings to polished concrete, pool decks and stripping old floors back to bare concrete. Every job is planned from the slab up, because the readings I take on the walk-through decide which system fits and how much prep comes first. If two systems would both work on your floor, I'll tell you the trade-off and which one I'd pick, and why.

  • Epoxy Floor Coatings

    Bare concrete in Seguin garages and workrooms dusts, stains and soaks up spills. We grind the slab open, fix the cracks and lay an epoxy system that fits how you use the room.

    Explore service

  • Commercial & Industrial Epoxy Floor Coatings

    Shops and small businesses here need a floor that takes carts, forklifts and chemicals. We match the system to the traffic and spills it'll see, and grind the slab so the coating bonds.

    Explore service

  • Garage Floor Coatings

    Garage floors here take hot tires and oil drips, and old coatings tend to lift where the tires park. We strip what's failing, grind to clean concrete and build a new floor.

    Explore service

  • Polyaspartic Floor Coatings

    Homeowners who can't give up the garage for long often ask about polyaspartic, a coating that cures much faster than standard epoxy. We'll tell you straight whether your slab and schedule suit it.

    Explore service

  • Metallic Epoxy Flooring

    Finished shops, game rooms and showrooms here sometimes call for metallic epoxy, which has depth and movement to it. It shows every flaw underneath, so we spend extra time getting the slab flat first.

    Explore service

  • Urethane Cement Flooring

    Commercial kitchens and wash-down rooms get hot water, grease and hard cleaning that plain epoxy doesn't take well. Urethane cement, a thick cement-based coating, handles it, and we trowel it over a ground slab.

    Explore service

  • Polished Concrete Flooring

    Some newer slabs in homes and storefronts here are good enough to polish instead of cover. We grind and hone the concrete itself to a shine, which leaves nothing on top to peel.

    Explore service

  • Stained Concrete Flooring

    Sound concrete in Seguin living areas and patios can take color without a full coating. We clean and open the surface, apply the stain and seal it so the color holds up.

    Explore service

  • Terrazzo Flooring

    Lobbies, entries and showpiece rooms here are where terrazzo, stone chips set in a binder and ground smooth, makes sense. It needs a flat, sound slab under it, so that's where we start.

    Explore service

  • Basement Flooring

    Below-grade rooms here push moisture up through the slab, and that's what lifts most coatings there. We test the slab before choosing a system, because the reading decides what stays down.

    Explore service

  • Concrete Grinding & Surface Preparation

    Many failed floors we see in Seguin went bad because the slab was never opened up first. We diamond-grind to clean, open concrete so whatever goes on next has something to grip.

    Explore service

  • Concrete Sealing

    Plain garage, patio and shop slabs here still soak up oil and water. A sealer slows that down, and we'll tell you which kind your slab can actually take.

    Explore service

  • Concrete Resurfacing & Overlays

    Older slabs around Seguin with a chipped, flaking or worn top don't always need tearing out. We repair the damage, then put down a thin cement overlay that gives you a new surface.

    Explore service

  • Self-Leveling Concrete & Overlays

    Slabs here that dip or carry years of patches won't give a flat finished floor as they are. We pour a self-leveling layer that flows out flat, so whatever goes on top sits right.

    Explore service

  • Pool Deck Coatings & Resurfacing

    Pool decks here take bare feet, splashed water and pool chemicals, and old coatings crack, fade and turn slick. We repair the deck, then recoat it with a textured surface that's easier underfoot.

    Explore service

  • Concrete Floor Stripping & Removal

    A lot of floors here come to us with old tile, glue, paint or a failing coating. We strip it to bare concrete, because a new floor can't grip what's already letting go.

    Explore service

What these floors look like when the prep is right

These photos show the kinds of floors we put down, from flake garage coatings to polished and stained concrete. Floors like these all start with a ground, clean slab, the part nobody sees afterward.

  • A commercial room with a smooth gray epoxy floor, yellow safety border, black drainage grates, and metal equipment supports.

  • A large insulated workshop with a glossy gray concrete floor divided by expansion joints.

  • A workshop with a gray-and-white speckled epoxy floor and several red vehicle lifts between unfinished walls and shelving.

What to know before a floor job in Seguin

Two things shape how a Seguin floor job gets started: the city's permit rules and the contractor you pick. Here's how both work, and what moves your price and your schedule.

Who decides if your floor needs a permit

In Seguin, the city's Building Official issues permits to build, alter, repair or demolish a structure. The city's list of work that needs no permit names painting, minor home repairs, siding and window replacement, and it doesn't mention floor coatings or overlays. So the list doesn't settle it for your job, and that office is the place to ask if you want to check yourself.

The city also won't issue a permit to a contractor who isn't registered with it, so an unregistered crew can't pull one for your floor. When a permit is needed, waiting on that approval usually sets the start date more than anything on the slab does, so I'd rather find out early than after you've cleared the garage.

  • I check with the city's building office before we book your job.
  • If a permit is needed, we apply for it as the contractor.
  • You get a copy of the permit for your own records.

Checking your contractor, and what sets the price

When you hire out any part of the work on your homestead, Seguin requires that contractor to be licensed with the city. To get that license, a contractor gives the city a certificate of liability insurance, so ask to see the city license and the insurance before anyone grinds your floor. We're fully licensed and insured, and you're welcome to ask us for both.

Price comes down to the slab more than the coating. Size and the system you pick matter, but so do cracks to fill, old coating or glue to strip, moisture and how much grinding it takes. The schedule turns on that same prep, the cure before you drive on it and any permit, and your estimate is where you'll see your own figure.

  • Ask any contractor for their city license and proof of liability insurance.
  • Old coatings, glue and deep cracks add prep time and cost.
  • Faster-curing systems can shorten the time you're out of the garage.

Get a free on-site estimate for your Seguin floor

Call (830) 340-0036 or send the form, and we'll reply within one business day to set a time. I come out to your Seguin property myself, walk the floor, take the slab readings and give you a written estimate, free and with no obligation to book.

(830) 340-0036

What we run into on Seguin floors and slabs

Seguin has a mix of homes, shops and small businesses, and the floors in them fail for a handful of the same reasons. These are the ones we check for first on every walk-through.

  • Coatings that are already lifting

    A lot of Seguin garages already have a coating on them, often a thin roll-on kit that's coming up where the tires sit. We don't coat over that, because a new floor only holds as well as what's under it, so the old layer comes off first.

  • Sealers you can't see

    Plenty of slabs here were sealed at some point, and a sealer can keep a new coating from bonding even when the concrete looks bare. We check how the slab takes water and grind until it soaks in, so the coating bonds to concrete and not to an old film.

  • Cracks, patches and low spots

    Older slabs usually carry some cracking, a few patches from past repairs and spots that hold water. We fill and repair what we can before coating, and I'll tell you plainly which cracks may still show through the finished floor.

  • Garages that became something else

    In a lot of homes, the garage has turned into a gym, a workshop or a place to hang out, and the floor needs to change with it. We pick the system for how you use the room now, not just for parking a car.

  • Shops that can't shut down

    Small business owners here usually can't close for long, and their floors take carts, chemicals and foot traffic all day. We plan the prep, the system and the cure around when the floor can be out of use, so you know the plan before we start.

Why it's worth calling us about your Seguin floor

I came to this from selling flooring and coatings, and I saw too many floors fail because nobody checked the slab first. That's the part we don't skip, and here's how it plays out on your job.

We read the slab before we sell anything

I come out to look at your job myself, walk the floor and take the slab readings, because the readings tell me whether a coating will hold. If your slab has moisture, an old sealer or damage that needs more than a coating, I'll say so before I talk about colors or systems. I'd rather lose the job by telling you the slab isn't ready than watch a coating lift later.

Once you go ahead, our own crew does the grinding, repairs and install, and I run the job. The prep is the part nobody sees once the floor is down, and it's the part that decides whether the floor holds up, so it's where we spend the time. We've been in business since 2021, and none of that work gets handed to another company.

  • Licensed and insured on your job

    We're fully licensed and insured, which matters when a crew is running grinders and mixing coatings in your garage or your business. Ask to see the paperwork when I come out, and hold anyone else you're pricing to the same standard.

  • Written estimate after a slab check

    I don't price a floor from a photo. I walk it, check the slab and put the scope and price in writing, so you can see what's prep and what's coating and compare it fairly with other bids.

  • Satisfaction guaranteed on every job

    That's our promise, and it rests on the prep. We grind, repair and check the slab before anything goes down, and I'm on the job running it, so the floor you get is the one we talked about at the estimate.

  • Garage and shop floors first

    We're best known for garage and shop floors and for being honest about what a slab can take. Homeowners call us, and so do business owners who need a working floor back, so call (830) 340-0036 and tell me what yours is doing.

Questions Seguin homeowners ask about floor work

These are questions we hear a lot from homeowners and shop owners in Seguin. If yours isn't here, call and ask, and I'll give you a straight answer.

How much does an epoxy garage floor cost in Seguin, TX?

An epoxy garage floor in Seguin is priced after I've seen the slab, because prep is often the bigger share of the work and you can't judge it from a photo. A sound, bare slab costs less to get ready than one with an old coating, wide cracks or moisture, and a faster-curing polyaspartic or a metallic finish costs more than a basic flake system. Call (830) 340-0036 and I'll come take a look.

Can I coat my own garage floor in Seguin without hiring a contractor?

Yes. If you own and live in the house as your homestead, the city lets you apply for any permit the job needs and do the work yourself. The home has to be registered as your homestead with the Guadalupe County Appraisal District, and the work still has to meet the city's codes and ordinances. If you want to do the coating yourself, our concrete grinding and surface prep can be done on its own.

What causes epoxy garage floors to peel in Seguin?

Most peeling starts with the slab, not the coating. Either the concrete was only washed instead of ground, so the coating had nothing to grip, or moisture coming up through the slab pushed it off from below. That's why I take slab readings before we pick a system, and why a slab that tests wet gets a different plan or waits.

How do I find out if my Seguin property is in a flood zone?

You can ask the city's Floodplain Administrator to look up your property on the FEMA flood maps. The city treats that as information only, not a ruling on flood insurance, on what you can build or a survey, and bigger development can need more review. For a floor, it's worth knowing, because a garage or ground-level room that may take on water calls for a system that handles it and cleans up easily.

Service areas

We're based in Seguin and work in the cities around it, including Cibolo, New Braunfels, San Marcos, Schertz, Luling and Lockhart, and more beyond those. If your city isn't listed, call (830) 340-0036 and ask.

Ask about your location
(830) 340-0036Get an estimate