Seguin Epoxy Floors & Concrete PolishingSeguin Epoxy Floors & Concrete Polishing(830) 340-0036

Polyaspartic Floor Coatings in Seguin TX - a coated floor that holds up for years

Dusty, stained or peeling garage concrete? We prep the slab by machine and lay down a polyaspartic coating that's easy to keep clean.

An empty garage with a glossy black, white, and gray flake-coated floor and gray walls.

Is polyaspartic worth paying more than epoxy for your floor?

Polyaspartic floor coatings in Seguin, TX are a coating system we lay over prepared concrete, most often a garage floor, and they give you a finished surface that holds up for years with very little upkeep.

Most calls start with a garage slab that's dusty, stained or shedding an old coating, from a homeowner who's heard polyaspartic is the better product. It usually costs more than standard epoxy and usually lasts longer, so the real question is how hard you use the space and how long you plan to stay in the house.

The price moves with the size of the floor, how much grinding and crack repair the slab needs and the finish you pick, and the schedule turns on that prep plus the cure before you can park again. Guadalupe County has more shrink-swell clay, soil that swells when it's wet and shrinks as it dries, than the Texas average, so I look closely at cracks before I quote any coating here. Your written estimate gives you the figure for your own floor.

  • Most of the floors we coat this way are garages and shop floors that take cars and tools.
  • Crack repair and patching of chips and low spots happens before any coating goes down.
  • Plan to empty the garage before we start, since we coat the whole floor wall to wall.

What happens after you call about a polyaspartic floor in Seguin?

Here's how a polyaspartic job runs with us, from your first call to the final walk-through. I'm the one who comes out to look at your slab, and our own crew does the work.

  1. Call or send a message

    Call (830) 340-0036 or use the form, and tell us roughly how many square feet the floor is. If the slab has ever blistered a coating or shown damp spots, mention that too, because it tells me what to look for.

  2. I check the slab in person

    I come out myself, look the floor over, take moisture readings, check the cracks and ask how you use the space. You get a written estimate that spells out the prep and the price, so you know the number before anything is booked.

  3. Our crew preps and coats

    If you go ahead, we set a date, and our own crew grinds the slab and lays down the coating with me running the job. Keep cars out until the full cure, which the questions below cover.

  4. We walk the floor together

    Before we pack up, we walk the finished floor with you and go over anything you want a second look at. Once the cure is done, the garage is yours again.

How we put down a polyaspartic floor coating

Polyaspartic costs more than standard epoxy, and I'll tell you plainly whether it's worth it for the way you use your garage or shop. If you pick it, we prep by machine, because one coating maker's instructions call for shotblasting or diamond grinding, two ways of roughing up the concrete by machine, and rule out acid etching, so it's fair to ask any installer which method their quote includes. We check the slab for moisture like we would for any coating, since that same maker warns that vapor coming up through a slab with no working moisture barrier can blister the coating and make it fail. Then we patch the cracks, coat the floor and let it cure.

  • Polyaspartic coating

    This suits a garage or shop you use hard every day, because it usually outlasts standard epoxy and gets you back on the floor quickly. It's the one I'd point you to if you plan to stay in the house a long while.

  • Standard epoxy coating

    This suits a lighter-use garage or a tighter budget, since it costs less up front. If that sounds more like your space, our epoxy floor coatings page walks through it.

Get a written polyaspartic estimate for your floor

Send the form or call (830) 340-0036, and we'll reply within one business day to set up a free on-site visit. I'll check your slab and give you a written estimate, with no pressure to book.

(830) 340-0036

Polyaspartic floor coating questions we hear in Seguin

These are the questions Seguin homeowners usually ask before choosing polyaspartic over epoxy. The figures come from coating makers and a national cost guide, so treat them as a starting point for your own floor.

How much does a polyaspartic garage floor coating cost in Seguin TX?

Installed polyaspartic garage floor coating usually costs about $4 to $10 per square foot across the US, and that's the market's range, not our price. Where your floor lands comes down to how much prep the slab needs and the finish you choose. Call (830) 340-0036 and I'll give you a written figure for your floor.

How long does a polyaspartic floor last compared to epoxy?

One national cost guide puts a professionally installed polyaspartic system at 10 to 20 or more years, against 5 to 10 years for typical epoxy. The same guide prices polyaspartic above solid color epoxy, so you're paying more up front for a longer life. How long yours lasts still comes down to the prep under it, and our promise is satisfaction guaranteed on every job.

How long does a polyaspartic coating take to cure before I can park on it?

With one maker's product, you can walk on the floor after 12 hours, and vehicles wait 24 to 72 hours for the full cure. Plan to park in the driveway or on the street until then, and we'll go over the wait for your floor when we set the date.

What is the best weather to apply polyaspartic floor coating?

One product's data sheet says it goes on best between 60°F and 90°F and shouldn't be applied when relative humidity, the moisture in the air, is above 85%. If the day we've set falls outside the product's range, I'd rather move the date than coat the floor anyway.

Does a flooring contractor need a license in Seguin TX?

Yes, Seguin requires any contractor you hire for any phase of the building process to be licensed with the city and registered with it before a permit is issued, and we're fully licensed and insured. If you'd rather do the work yourself, the city lets owners work on their own homestead with the proper permits, as long as you own and live in the house and it's registered as a homestead with the Guadalupe County Appraisal District.

Is a polyaspartic garage floor slippery when it gets wet?

It can be, which is why one maker recommends adding an angular slip-resistant grit to the coating on floors that may get wet, oily or greasy. If your garage sees water off the car or oil drips, ask for that grit in the quote and I'll write it in.

Polyaspartic floor coatings in Seguin and nearby cities

Seguin's no-permit list doesn't name floor coatings, so I ask the city's building office first, and if they want a permit, we apply as your contractor and you get a copy. We're based in Seguin and work the cities around it.

(830) 340-0036Get an estimate